Creating a Subroutine to Process all Components in an Assembly

Hi,
I want to walk /process recursive from buttom up to the top level of a deeper fragmented assembly structure . -> I want to fix all compoments of a imported assembly.
thanks ind ad

I'd like to know if is possible create this same subroutine to run at Teamcenter?
I need to perform a task over files inside an assembly. 
My journal works individually, but i need a way to run this determined task (just some clicks) over whole assembly components.

Please HELP

'''fails!! UNABLE TO CAST OBJECT OF TYPE 'NXOpen.Routing.PartDefinitionShadow' to type 'NXOpen.Routing.Electrical.ElectricalPartDefinitionShadow'

dim ConnectorDevice_Collection1 as nxopen.routing.electrical.ConnectorDeviceCollection
ConnectorDevice_Collection1 = workpart.routemanager.ConnectorDevices
dim ConnectorDevice_s1() as nxopen.routing.electrical.ConnectorDevice = ConnectorDevice_Collection1.toarray()
dim ElectricalPartDefinitionShadow1(ConnectorDevice_s1.length - 1) as NXOpen.Routing.Electrical.ElectricalPartDefinitionShadow
dim lineouts(ConnectorDevice_s1.length - 1) as string
dim lineOut as string = ""
for i as integer = 0 to ( ConnectorDevice_s1.length - 1 )
ElectricalPartDefinitionShadow1(i) = ConnectorDevice_s1(i).GetPartDefinition() '''fails!! UNABLE TO CAST OBJECT OF TYPE
lineouts(i)= lineOut
next

Is it possible to
Cycle through each component as Make Displayed part ?
or
Cycle through each component as Work Displayed part ?

This is the vb that tested out. Please comment with suggestions

'NXJournaling
'April 2, 2014

'Journal to Cycle All Part Files in a specified folder (with option to include subfolders)
'based on 'cyclePartFiles' code example from GTAC
'
'This journal will prompt for a folder (selection dialog)
'then open each file and perform some action on the file (export drawing as pdf) then close the file

Option Strict Off
Imports System
Imports System.IO
Imports System.Collections.Generic
Imports System.Windows.Forms
Imports System.Windows.Forms.MessageBox

Imports NXOpen
Imports NXOpenUI
Imports NXOpen.UF

Module Cycle_Files_and_Folders_b
Dim theSession As Session = Session.GetSession
Dim LW As ListingWindow = theSession.ListingWindow

Dim workPart As Part = theSession.Parts.Work
Dim displayPart As Part = theSession.Parts.Display
Dim initialPart As Part = theSession.Parts.Display

Dim nTotalPartFiles As Integer = 0

Sub Main()

Dim strOutputFolder As String
LW.Open()
Try

Dim FolderBrowserDialog1 As New FolderBrowserDialog
' Change the .SelectedPath property to the default location
With FolderBrowserDialog1
' Desktop is the root folder in the dialog.
.RootFolder = Environment.SpecialFolder.Desktop
' Change the following line to default to a given path
.SelectedPath = "C:\"
' Prompt the user with a custom message.
.Description = "Select the directory to scan"
If .ShowDialog = DialogResult.OK Then
' Display the selected folder if the user clicked on the OK button.
'msgbox(.SelectedPath)
strOutputFolder = .SelectedPath
Else
'user pressed "cancel", exit the journal
Exit Sub
End If
End With

LW.WriteLine("Cycle All Parts in a Folder Tree")
LW.WriteLine("Start Time: " & CType(TimeOfDay(), String))
LW.WriteLine("")

processParts(strOutputFolder, False)

LW.WriteLine("")
LW.WriteLine("Total Part Files Scanned: " & nTotalPartFiles)
LW.WriteLine("Stop Time: " & CType(TimeOfDay(), String))

Catch ex As NXException
LW.WriteLine("Cycle Files and Folders Error: " & ex.Message)
Exit Sub
End Try
End Sub

'***************************************************************************
'Process All Parts in a Directory

Sub processParts(ByVal directoryPath As String, ByVal includeSubDirs As Boolean)

Try
Dim nPartFiles As Integer = 0
Dim part1 As Part
Dim files() As String

If includeSubDirs Then
files = Directory.GetFiles(directoryPath, "*.prt", SearchOption.AllDirectories)
Else
files = Directory.GetFiles(directoryPath, "*.prt", SearchOption.TopDirectoryOnly)
End If
For Each fileName As String In files
nPartFiles += 1
nTotalPartFiles += 1
LW.WriteLine(" " & nPartFiles & " " & Path.GetFileName(fileName))

If (IsNothing(initialPart)) OrElse (initialPart.FullPath <> fileName) Then
part1 = theSession.Parts.OpenDisplay(fileName, Nothing)
Else
'LW.WriteLine("initial part equals display part: " & initialPart.Equals(displayPart).ToString)
part1 = displayPart
End If

displayPart = theSession.Parts.Display
workPart = theSession.Parts.Display

'do something
'write your own subroutines and/or functions to process the part and call them from here
ExportPDF(part1)

'close file unless this file was initially open
If (IsNothing(initialPart)) OrElse (initialPart.FullPath <> fileName) Then
'part1.Save(BasePart.SaveComponents.True, BasePart.CloseAfterSave.True)
part1.Close(BasePart.CloseWholeTree.False, BasePart.CloseModified.UseResponses, Nothing)
part1 = Nothing
workPart = Nothing
displayPart = Nothing
End If

If Not IsNothing(initialPart) Then
Dim partLoadStatus1 As PartLoadStatus
Dim status1 As PartCollection.SdpsStatus
status1 = theSession.Parts.SetDisplay(initialPart, False, False, partLoadStatus1)

displayPart = theSession.Parts.Display
partLoadStatus1.Dispose()
theSession.Parts.SetWork(displayPart)
workPart = theSession.Parts.Work
End If

Next fileName
Catch ex As Exception
LW.WriteLine("Part Scan Error: " & ex.Message)
End Try

End Sub

'***************************************************************************
Function CountBodies() As Integer

Dim total As Integer
total = workPart.Bodies.ToArray.Length
Return total

End Function

'***********************************************************************
Sub ExportPDF(ByVal thePart As Part)

Dim myPdfExporter As New NXJ_PdfExporter
myPdfExporter.Part = thePart

Try
myPdfExporter.Commit()
Catch ex As Exception
MessageBox.Show("Error:" & ControlChars.CrLf & ex.GetType.ToString & " : " & ex.Message, "PDF export error", MessageBoxButtons.OK, MessageBoxIcon.Error)

Finally
myPdfExporter = Nothing
End Try

End Sub

'***********************************************************************
Public Function GetUnloadOption(ByVal dummy As String) As Integer

'Unloads the image when the NX session terminates
GetUnloadOption = NXOpen.Session.LibraryUnloadOption.AtTermination

End Function

End Module

#Region "imports"

'** uncomment the imports statments if using this as a standalone class file
'Imports System
'Imports System.IO
'Imports System.Collections
'Imports System.Windows.Forms
'Imports System.Windows.Forms.MessageBox
'Imports NXOpen
'Imports NXOpen.UF

#End Region

'Information for adding this code to your project:
' if you are going to compile your code:
' add this class file to your project, create and use an instance of this class in your code
'
' If you intend to use this in a journal (no compilation required),
' make sure all of the imports statements above are present at the top of your journal file.
' Copy and paste all of the code below here to your journal file (paste it after your "End Module" statement).
' Create and use an instance of this class in your module.
' One of the limitations of a journal is that all the code must be in a single file.

Class NXJ_PdfExporter

#Region "information"

'NXJournaling.com
'Jeff Gesiakowski
'December 9, 2013
'
'NX 8.5
'class to export drawing sheets to pdf file
'
'Please send any bug reports and/or feature requests to: info@nxjournaling.com
'
'version 0.4 {beta}, initial public release
' special thanks to Mike H. and Ryan G.
'
'Public Properties:
' ExportToTc [Boolean] {read/write} - flag indicating that the pdf should be output to the TC dataset, False value = output to filesystem
' default value: False
' IsTcRunning [Boolean] {read only} - True if NX is running under TC, false if native NX
' OpenPdf [Boolean] {read/write} - flag to indicate whether the journal should attempt to open the pdf after creation
' default value: False
' OutputFolder [String] {read/write} - path to the output folder
' default value (native): folder of current part
' default value (TC): user's Documents folder
' OutputPdfFileName [String] {read/write} - full file name of outut pdf file (if exporting to filesystem)
' default value (native): \_{_preliminary}.pdf
' default value (TC): \_{_preliminary}.pdf
' OverwritePdf [Boolean] {read/write} - flag indicating that the pdf file should be overwritten if it already exists
' currently only applies when exporting to the filesystem
' default value: True
' Part [NXOpen.Part] {read/write} - part that contains the drawing sheets of interest
' default value: none, must be set by user
' PartFilePath [String] {read only} - for native NX part files, the path to the part file
' PartNumber [String] {read only} - for native NX part files: part file name
' for TC files: value of DB_PART_NO attribute
' PartRevision [String] {read only} - for native NX part files: value of part "Revision" attribute, if present
' for TC files: value of DB_PART_REV
' PreliminaryPrint [Boolean] {read/write} - flag indicating that the pdf should be marked as an "preliminary"
' when set to True, the output file will be named _preliminary.pdf
' default value: False
' SheetCount [Integer] {read only} - integer indicating the total number of drawing sheets found in the file
' ShowConfirmationDialog [Boolean] {read/write} - flag indicating whether to show the user a confirmation dialog after pdf is created
' if set to True and ExportToTc = False, user will be asked if they want to open the pdf file
' if user chooses "Yes", the code will attempt to open the pdf with the default viewer
' default value: False
' SortSheetsByName [Boolean] {read/write} - flag indicating that the sheets should be sorted by name before output to pdf
' default value: True
' TextAsPolylines [Boolean] {read/write} - flag indicating that text objects should be output as polylines instead of text objects
' default value: False set this to True if you are using an NX font and the output changes the 'look' of the text
' UseWatermark [Boolean] {read/write} - flag indicating that watermark text should be applied to the face of the drawing
' default value: False
' WatermarkAddDatestamp [Boolean] {read/write} - flag indicating that today's date should be added to the end of the
' watermark text
' default value: True
' WatermarkText [String] {read/write} - watermark text to use
' default value: "PRELIMINARY PRINT NOT TO BE USED FOR PRODUCTION"
'
'Public Methods:
' New() - initializes a new instance of the class
' PickExportFolder() - displays a FolderPicker dialog box, the user's choice will be set as the output folder
' PromptPreliminaryPrint() - displays a yes/no dialog box asking the user if the print should be marked as preliminary
' if user chooses "Yes", PreliminaryPrint and UseWatermark are set to True
' PromptWatermarkText() - displays an input box prompting the user to enter text to use for the watermark
' if cancel is pressed, the default value is used
' if Me.UseWatermark = True, an input box will appear prompting the user for the desired watermark text. Initial text = Me.WatermarkText
' if Me.UseWatermark = False, calling this method will have no effect
' Commit() - using the specified options, export the given part's sheets to pdf

#End Region

#Region "properties and private variables"

Private Const Version As String = "0.5.0"

Private _theSession As Session = Session.GetSession
Private _theUfSession As UFSession = UFSession.GetUFSession
Private lg As LogFile = _theSession.LogFile

Private _drawingSheets As New List(Of Drawings.DrawingSheet)
Private _exportFile As String = ""
Private _partUnits As Integer
Private _watermarkTextFinal As String = ""

Private _exportToTC As Boolean = False
Public Property ExportToTc() As Boolean
Get
Return _exportToTC
End Get
Set(ByVal value As Boolean)
lg.WriteLine("Set Property ExportToTc")
_exportToTC = value
lg.WriteLine(" exportToTc: " & _exportToTC.ToString)
Me.GetOutputName()
lg.WriteLine("exiting Set Property ExportToTc")
lg.WriteLine("")
End Set
End Property

Private _isTCRunning As Boolean
Public ReadOnly Property IsTCRunning() As Boolean
Get
Return _isTCRunning
End Get
End Property

Private _openPdf As Boolean = False
Public Property OpenPdf() As Boolean
Get
Return _openPdf
End Get
Set(ByVal value As Boolean)
lg.WriteLine("Set Property OpenPdf")
_openPdf = value
lg.WriteLine(" openPdf: " & _openPdf.ToString)
lg.WriteLine("exiting Set Property OpenPdf")
lg.WriteLine("")
End Set
End Property

Private _outputFolder As String = ""
Public Property OutputFolder() As String
Get
Return _outputFolder
End Get
Set(ByVal value As String)
lg.WriteLine("Set Property OutputFolder")
If Not Directory.Exists(value) Then
Try
lg.WriteLine(" specified directory does not exist, trying to create it...")
Directory.CreateDirectory(value)
lg.WriteLine(" directory created: " & value)
Catch ex As Exception
lg.WriteLine(" ** error while creating directory: " & value)
lg.WriteLine(" " & ex.GetType.ToString & " : " & ex.Message)
lg.WriteLine(" defaulting to: " & My.Computer.FileSystem.SpecialDirectories.MyDocuments)
value = My.Computer.FileSystem.SpecialDirectories.MyDocuments
End Try
End If
_outputFolder = value
_outputPdfFile = IO.Path.Combine(_outputFolder, _exportFile & ".pdf")
lg.WriteLine(" outputFolder: " & _outputFolder)
lg.WriteLine(" outputPdfFile: " & _outputPdfFile)
lg.WriteLine("exiting Set Property OutputFolder")
lg.WriteLine("")
End Set
End Property

Private _outputPdfFile As String = ""
Public Property OutputPdfFileName() As String
Get
Return _outputPdfFile
End Get
Set(ByVal value As String)
lg.WriteLine("Set Property OutputPdfFileName")
_outputPdfFile = value
lg.WriteLine(" outputPdfFile: " & value)
'update _outputFolder
Me.OutputFolder = Me.GetParentPath(_outputPdfFile)
lg.WriteLine("exiting Set Property OutputPdfFileName")
lg.WriteLine("")
End Set
End Property

Private _overwritePdf As Boolean = True
Public Property OverwritePdf() As Boolean
Get
Return _overwritePdf
End Get
Set(ByVal value As Boolean)
lg.WriteLine("Set Property OverwritePdf")
_overwritePdf = value
lg.WriteLine(" overwritePdf: " & _overwritePdf.ToString)
lg.WriteLine("exiting Set Property OverwritePdf")
lg.WriteLine("")
End Set
End Property

Private _thePart As Part = Nothing
Public Property Part() As Part
Get
Return _thePart
End Get
Set(ByVal value As Part)
lg.WriteLine("Set Property Part")
_thePart = value
_partUnits = _thePart.PartUnits
Me.GetPartInfo()
If Me.SortSheetsByName Then
Me.SortDrawingSheets()
End If
lg.WriteLine("exiting Set Property Part")
lg.WriteLine("")
End Set
End Property

Private _partFilePath As String
Public ReadOnly Property PartFilePath() As String
Get
Return _partFilePath
End Get
End Property

Private _partNumber As String
Public ReadOnly Property PartNumber() As String
Get
Return _partNumber
End Get
End Property

Private _partRevision As String = ""
Public ReadOnly Property PartRevision() As String
Get
Return _partRevision
End Get
End Property

Private _preliminaryPrint As Boolean = False
Public Property PreliminaryPrint() As Boolean
Get
Return _preliminaryPrint
End Get
Set(ByVal value As Boolean)
lg.WriteLine("Set Property PreliminaryPrint")
_preliminaryPrint = value
If String.IsNullOrEmpty(_exportFile) Then
'do nothing
Else
Me.GetOutputName()
End If
lg.WriteLine(" preliminaryPrint: " & _preliminaryPrint.ToString)
lg.WriteLine("exiting Set Property PreliminaryPrint")
lg.WriteLine("")
End Set
End Property

Public ReadOnly Property SheetCount() As Integer
Get
Return _drawingSheets.Count
End Get
End Property

Private _showConfirmationDialog As Boolean = False
Public Property ShowConfirmationDialog() As Boolean
Get
Return _showConfirmationDialog
End Get
Set(ByVal value As Boolean)
_showConfirmationDialog = value
End Set
End Property

Private _sortSheetsByName As Boolean = True
Public Property SortSheetsByName() As Boolean
Get
Return _sortSheetsByName
End Get
Set(ByVal value As Boolean)
lg.WriteLine("Set Property SortSheetsByName")
_sortSheetsByName = value
If _sortSheetsByName = True Then
Me.SortDrawingSheets()
End If
lg.WriteLine(" sortSheetsByName: " & _sortSheetsByName.ToString)
lg.WriteLine("exiting Set Property SortSheetsByName")
lg.WriteLine("")
End Set
End Property

Private _textAsPolylines As Boolean = False
Public Property TextAsPolylines() As Boolean
Get
Return _textAsPolylines
End Get
Set(ByVal value As Boolean)
lg.WriteLine("Set Property TextAsPolylines")
_textAsPolylines = value
lg.WriteLine(" textAsPolylines: " & _textAsPolylines.ToString)
lg.WriteLine("exiting Set Property TextAsPolylines")
lg.WriteLine("")
End Set
End Property

Private _useWatermark As Boolean = False
Public Property UseWatermark() As Boolean
Get
Return _useWatermark
End Get
Set(ByVal value As Boolean)
lg.WriteLine("Set Property UseWatermark")
_useWatermark = value
lg.WriteLine(" useWatermark: " & _useWatermark.ToString)
lg.WriteLine("exiting Set Property UseWatermark")
lg.WriteLine("")
End Set
End Property

Private _watermarkAddDatestamp As Boolean = True
Public Property WatermarkAddDatestamp() As Boolean
Get
Return _watermarkAddDatestamp
End Get
Set(ByVal value As Boolean)
lg.WriteLine("Set Property WatermarkAddDatestamp")
_watermarkAddDatestamp = value
lg.WriteLine(" watermarkAddDatestamp: " & _watermarkAddDatestamp.ToString)
If _watermarkAddDatestamp Then
'to do: internationalization for dates
_watermarkTextFinal = _watermarkText & " " & Today
Else
_watermarkTextFinal = _watermarkText
End If
lg.WriteLine(" watermarkTextFinal: " & _watermarkTextFinal)
lg.WriteLine("exiting Set Property WatermarkAddDatestamp")
lg.WriteLine("")
End Set
End Property

Private _watermarkText As String = "PRELIMINARY PRINT NOT TO BE USED FOR PRODUCTION"
Public Property WatermarkText() As String
Get
Return _watermarkText
End Get
Set(ByVal value As String)
lg.WriteLine("Set Property WatermarkText")
_watermarkText = value
lg.WriteLine(" watermarkText: " & _watermarkText)
lg.WriteLine("exiting Set Property WatermarkText")
lg.WriteLine("")
End Set
End Property

#End Region

#Region "public methods"

Public Sub New()

lg.WriteLine("")
lg.WriteLine("~ NXJournaling.com: Start of drawing to PDF journal ~")
lg.WriteLine(" ~~ Version: " & Version & " ~~")
lg.WriteLine(" ~~ Timestamp of run: " & DateTime.Now.ToString & " ~~")
lg.WriteLine("PdfExporter Sub New()")

'determine if we are running under TC or native
_theUfSession.UF.IsUgmanagerActive(_isTCRunning)
lg.WriteLine("IsTcRunning: " & _isTCRunning.ToString)

lg.WriteLine("exiting Sub New")
lg.WriteLine("")

End Sub

Public Sub PickExportFolder()

'Requires:
' Imports System.IO
' Imports System.Windows.Forms
'if the user presses OK on the dialog box, the chosen path is returned
'if the user presses cancel on the dialog box, 0 is returned
lg.WriteLine("Sub PickExportFolder")

If Me.ExportToTc Then
lg.writeline(" N/A when ExportToTc = True")
lg.writeline(" exiting Sub PickExportFolder")
lg.writeline("")
Return
End If

Dim strLastPath As String

'Key will show up in HKEY_CURRENT_USER\Software\VB and VBA Program Settings
Try
'Get the last path used from the registry
lg.WriteLine(" attempting to retrieve last export path from registry...")
strLastPath = GetSetting("NX journal", "Export pdf", "ExportPath")
'msgbox("Last Path: " & strLastPath)
Catch e As ArgumentException
lg.WriteLine(" ** Argument Exception: " & e.Message)
Catch e As Exception
lg.WriteLine(" ** Exception type: " & e.GetType.ToString)
lg.WriteLine(" ** Exception message: " & e.Message)
'MsgBox(e.GetType.ToString)
Finally
End Try

Dim FolderBrowserDialog1 As New FolderBrowserDialog

' Then use the following code to create the Dialog window
' Change the .SelectedPath property to the default location
With FolderBrowserDialog1
' Desktop is the root folder in the dialog.
.RootFolder = Environment.SpecialFolder.Desktop
' Select the D:\home directory on entry.
If Directory.Exists(strLastPath) Then
.SelectedPath = strLastPath
Else
.SelectedPath = My.Computer.FileSystem.SpecialDirectories.MyDocuments
End If
' Prompt the user with a custom message.
.Description = "Select the directory to export .pdf file"
If .ShowDialog = DialogResult.OK Then
' Display the selected folder if the user clicked on the OK button.
Me.OutputFolder = .SelectedPath
lg.WriteLine(" selected output path: " & .SelectedPath)
' save the output folder path in the registry for use on next run
SaveSetting("NX journal", "Export pdf", "ExportPath", .SelectedPath)
Else
'user pressed 'cancel', keep original value of output folder
lg.WriteLine(" folder browser dialog cancel button pressed")
lg.WriteLine(" current output path: " & Me.OutputFolder)
End If
End With

lg.WriteLine("exiting Sub PickExportFolder")
lg.WriteLine("")

End Sub

Public Sub PromptPreliminaryPrint()

lg.WriteLine("Sub PromptPreliminaryPrint")

Dim rspPreliminaryPrint As DialogResult
rspPreliminaryPrint = MessageBox.Show("Add preliminary print watermark?", "Add Watermark?", MessageBoxButtons.YesNo, MessageBoxIcon.Question)
If rspPreliminaryPrint = DialogResult.Yes Then
Me.PreliminaryPrint = True
Me.UseWatermark = True
lg.WriteLine(" this is a preliminary print")
Else
Me.PreliminaryPrint = False
lg.WriteLine(" this is not a preliminary print")
End If

lg.WriteLine("exiting Sub PromptPreliminaryPrint")
lg.WriteLine("")

End Sub

Public Sub PromptWatermarkText()

lg.WriteLine("Sub PromptWatermarkText")
lg.WriteLine(" useWatermark: " & Me.UseWatermark.ToString)

Dim theWatermarkText As String = Me.WatermarkText

If Me.UseWatermark Then
theWatermarkText = InputBox("Enter watermark text", "Watermark", theWatermarkText)
Me.WatermarkText = theWatermarkText
Else
lg.WriteLine(" suppressing watermark prompt")
End If

lg.WriteLine("exiting Sub PromptWatermarkText")
lg.WriteLine("")

End Sub

Public Sub Commit()

lg.WriteLine("Sub ExportSheetsToPdf")
lg.WriteLine(" number of drawing sheets in part file: " & _drawingSheets.Count.ToString)

Dim sheetCount As Integer = 0
Dim sheetsExported As Integer = 0

Dim numPlists As Integer = 0
Dim myPlists() As Tag

'_theUfSession.Plist.AskTags(myPlists, numPlists)
For i As Integer = 0 To numPlists - 1
_theUfSession.Plist.Update(myPlists(i))
Next

For Each tempSheet As Drawings.DrawingSheet In _drawingSheets

sheetCount += 1

lg.WriteLine(" working on sheet: " & tempSheet.Name)
lg.WriteLine(" sheetCount: " & sheetCount.ToString)

'the pdf export uses 'append file', if we are on sheet 1 make sure the user wants to overwrite
'if the drawing is multisheet, don't ask on subsequent sheets
If sheetCount = 1 Then
'export to file system
If File.Exists(_outputPdfFile) Then
lg.WriteLine(" specified output file already exists")
If Me.OverwritePdf Then
Try
lg.WriteLine(" user chose to overwrite existing pdf file")
File.Delete(_outputPdfFile)
Catch ex As Exception
'rethrow error?
lg.WriteLine(" ** error while attempting to delete existing pdf file")
lg.WriteLine(" " & ex.GetType.ToString & " : " & ex.Message)
End Try
Else
'file exists, overwrite option is set to false - do nothing
lg.WriteLine(" specified pdf file exists, user chose not to overwrite")
lg.WriteLine(" exiting Sub ExportSheetsToPdf")
lg.WriteLine("")
Exit Sub
End If
End If

End If

'update any views that are out of date
lg.WriteLine(" updating OutOfDate views on sheet: " & tempSheet.Name)
Me.Part.DraftingViews.UpdateViews(Drawings.DraftingViewCollection.ViewUpdateOption.OutOfDate, tempSheet)

Next

If Me._drawingSheets.Count > 0 Then

lg.WriteLine(" done updating views on all sheets")

Try
lg.WriteLine(" calling Sub ExportPdf")
lg.WriteLine("")
Me.ExportPdf()
Catch ex As Exception
lg.WriteLine(" ** error exporting PDF")
lg.WriteLine(" " & ex.GetType.ToString & " : " & ex.Message)
'MessageBox.Show("Error occurred in PDF export" & vbCrLf & ex.Message, "Error exporting PDF", MessageBoxButtons.OK, MessageBoxIcon.Error)
Throw ex
End Try

Else
'no sheets in file
lg.WriteLine(" ** no drawing sheets in file: " & Me._partNumber)

End If

If Me.ShowConfirmationDialog Then
Me.DisplayConfirmationDialog()
End If

If (Not Me.ExportToTc) AndAlso (Me.OpenPdf) AndAlso (Me._drawingSheets.Count > 0) Then
'open new pdf print
lg.WriteLine(" trying to open newly created pdf file")
Try
System.Diagnostics.Process.Start(Me.OutputPdfFileName)
lg.WriteLine(" pdf open process successful")
Catch ex As Exception
lg.WriteLine(" ** error opening pdf **")
lg.WriteLine(" " & ex.GetType.ToString & " : " & ex.Message)
End Try
End If

lg.WriteLine(" exiting Sub ExportSheetsToPdf")
lg.WriteLine("")

End Sub

#End Region

#Region "private methods"

Private Sub GetPartInfo()

lg.WriteLine("Sub GetPartInfo")

If Me.IsTCRunning Then
_partNumber = _thePart.GetStringAttribute("DB_PART_NO")
_partRevision = _thePart.GetStringAttribute("DB_PART_REV")

lg.WriteLine(" TC running")
lg.WriteLine(" partNumber: " & _partNumber)
lg.WriteLine(" partRevision: " & _partRevision)

Else 'running in native mode

_partNumber = IO.Path.GetFileNameWithoutExtension(_thePart.FullPath)
_partFilePath = IO.Directory.GetParent(_thePart.FullPath).ToString

lg.WriteLine(" Native NX")
lg.WriteLine(" partNumber: " & _partNumber)
lg.WriteLine(" partFilePath: " & _partFilePath)

Try
_partRevision = _thePart.GetStringAttribute("REVISION")
_partRevision = _partRevision.Trim
Catch ex As Exception
_partRevision = ""
End Try

lg.WriteLine(" partRevision: " & _partRevision)

End If

If String.IsNullOrEmpty(_partRevision) Then
_exportFile = _partNumber
Else
_exportFile = _partNumber & "_" & _partRevision
End If

lg.WriteLine("")
Me.GetOutputName()

lg.WriteLine(" exportFile: " & _exportFile)
lg.WriteLine(" outputPdfFile: " & _outputPdfFile)
lg.WriteLine(" exiting Sub GetPartInfo")
lg.WriteLine("")

End Sub

Private Sub GetOutputName()

lg.WriteLine("Sub GetOutputName")

_exportFile.Replace("_preliminary", "")
_exportFile.Replace("_PDF_1", "")

If IsNothing(Me.Part) Then
lg.WriteLine(" Me.Part is Nothing")
Else

If Not IsTCRunning And _preliminaryPrint Then
_exportFile &= "_preliminary"
End If

If Me.ExportToTc Then 'export to Teamcenter dataset
lg.WriteLine(" export to TC option chosen")
If Me.IsTCRunning Then
lg.WriteLine(" TC is running")
_exportFile &= "_PDF_1"
Else
'error, cannot export to a dataset if TC is not running
lg.WriteLine(" ** error: export to TC option chosen, but TC is not running")
'todo: throw error
End If
Else 'export to file system
lg.WriteLine(" export to filesystem option chosen")
If Me.IsTCRunning Then
lg.WriteLine(" TC is running")
'exporting from TC to filesystem, no part folder to default to
'default to "MyDocuments" folder
_outputPdfFile = IO.Path.Combine(My.Computer.FileSystem.SpecialDirectories.MyDocuments, _exportFile & ".pdf")
Else
lg.WriteLine(" native NX")
'exporting from native to file system
'use part folder as default output folder
If _outputFolder = "" Then
_outputFolder = _partFilePath
End If
_outputPdfFile = IO.Path.Combine(_outputFolder, _exportFile & ".pdf")
End If

End If

End If

lg.WriteLine(" exiting Sub GetOutputName")
lg.WriteLine("")

End Sub

Private Sub GetDrawingSheets()

_drawingSheets.Clear()

For Each tempSheet As Drawings.DrawingSheet In _thePart.DrawingSheets
_drawingSheets.Add(tempSheet)
Next

End Sub

Private Sub SortDrawingSheets()

If _sortSheetsByName Then
Me.GetDrawingSheets()
_drawingSheets.Sort(AddressOf CompareSheetNames)
End If

End Sub

Private Function CompareSheetNames(ByVal x As Drawings.DrawingSheet, ByVal y As Drawings.DrawingSheet) As Integer

'case-insensitive sort
Dim myStringComp As StringComparer = StringComparer.CurrentCultureIgnoreCase

'for a case-sensitive sort (A-Z then a-z), change the above option to:
'Dim myStringComp As StringComparer = StringComparer.CurrentCulture

Return myStringComp.Compare(x.Name, y.Name)

End Function

Private Function GetParentPath(ByVal thePath As String) As String

lg.WriteLine("Function GetParentPath(" & thePath & ")")

Try
Dim directoryInfo As System.IO.DirectoryInfo
directoryInfo = System.IO.Directory.GetParent(thePath)
lg.WriteLine(" returning: " & directoryInfo.FullName)
lg.WriteLine("exiting Function GetParentPath")
lg.WriteLine("")

Return directoryInfo.FullName
Catch ex As ArgumentNullException
lg.WriteLine(" Path is a null reference.")
Throw ex
Catch ex As ArgumentException
lg.WriteLine(" Path is an empty string, contains only white space, or contains invalid characters")
Throw ex
End Try

lg.WriteLine("exiting Function GetParentPath")
lg.WriteLine("")

End Function

Private Sub ExportPdf()

lg.WriteLine("Sub ExportPdf")

Dim printPDFBuilder1 As PrintPDFBuilder

printPDFBuilder1 = _thePart.PlotManager.CreatePrintPdfbuilder()
printPDFBuilder1.Scale = 1.0
printPDFBuilder1.Colors = PrintPDFBuilder.Color.BlackOnWhite
printPDFBuilder1.Size = PrintPDFBuilder.SizeOption.ScaleFactor
printPDFBuilder1.RasterImages = True
printPDFBuilder1.ImageResolution = PrintPDFBuilder.ImageResolutionOption.Medium

If _thePart.PartUnits = BasePart.Units.Inches Then
lg.WriteLine(" part units: English")
printPDFBuilder1.Units = PrintPDFBuilder.UnitsOption.English
Else
lg.WriteLine(" part units: Metric")
printPDFBuilder1.Units = PrintPDFBuilder.UnitsOption.Metric
End If

If _textAsPolylines Then
lg.WriteLine(" output text as polylines")
printPDFBuilder1.OutputText = PrintPDFBuilder.OutputTextOption.Polylines
Else
lg.WriteLine(" output text as text")
printPDFBuilder1.OutputText = PrintPDFBuilder.OutputTextOption.Text
End If

lg.WriteLine(" useWatermark: " & _useWatermark.ToString)
If _useWatermark Then
printPDFBuilder1.AddWatermark = True
printPDFBuilder1.Watermark = _watermarkTextFinal
Else
printPDFBuilder1.AddWatermark = False
printPDFBuilder1.Watermark = ""
End If

lg.WriteLine(" export to TC? " & _exportToTC.ToString)
If _exportToTC Then
'output to dataset
'printPDFBuilder1.Relation = PrintPDFBuilder.RelationOption.Manifestation
'printPDFBuilder1.DatasetType = "PDF"
'printPDFBuilder1.NamedReferenceType = "PDF_Reference"
'printPDFBuilder1.Action = PrintPDFBuilder.ActionOption.Overwrite
printPDFBuilder1.Action = PrintPDFBuilder.ActionOption.New
printPDFBuilder1.DatasetName = _exportFile & "_PDF_1"
lg.WriteLine(" dataset name: " & _exportFile)

Try
lg.WriteLine(" printPDFBuilder1.Assign")
printPDFBuilder1.Assign()
Catch ex As NXException
lg.WriteLine(" ** error with printPDFBuilder1.Assign")
lg.WriteLine(" " & ex.ErrorCode & " : " & ex.Message)
End Try

Else
'output to filesystem
lg.WriteLine(" pdf file: " & _outputPdfFile)
printPDFBuilder1.Action = PrintPDFBuilder.ActionOption.Native
printPDFBuilder1.Append = False
printPDFBuilder1.Filename = _outputPdfFile

End If

printPDFBuilder1.SourceBuilder.SetSheets(_drawingSheets.ToArray)

Dim nXObject1 As NXObject
Try
lg.WriteLine(" printPDFBuilder1.Commit")
nXObject1 = printPDFBuilder1.Commit()

Catch ex As NXException
lg.WriteLine(" ** error with printPDFBuilder1.Commit")
lg.WriteLine(" " & ex.ErrorCode & " : " & ex.Message)

Finally
printPDFBuilder1.Destroy()
End Try

lg.WriteLine(" exiting Sub ExportPdf")
lg.WriteLine("")

End Sub

Private Sub DisplayConfirmationDialog()

Dim sb As New Text.StringBuilder

If Me._drawingSheets.Count = 0 Then
MessageBox.Show("No drawing sheets found in file.", "Information", MessageBoxButtons.OK, MessageBoxIcon.Information)
Return
End If

sb.Append("The following sheets were output to PDF:")
sb.AppendLine()
For Each tempSheet As Drawings.DrawingSheet In _drawingSheets
sb.AppendLine(" " & tempSheet.Name)
Next
sb.AppendLine()

If Not Me.ExportToTc Then
sb.AppendLine("Open pdf file now?")
End If

Dim prompt As String = sb.ToString

Dim response As DialogResult
If Me.ExportToTc Then
response = MessageBox.Show(prompt, Me.OutputPdfFileName, MessageBoxButtons.OK, MessageBoxIcon.Information)
Else
response = MessageBox.Show(prompt, Me.OutputPdfFileName, MessageBoxButtons.YesNo, MessageBoxIcon.Question, MessageBoxDefaultButton.Button1)
End If

If response = DialogResult.Yes Then
Me.OpenPdf = True
Else
Me.OpenPdf = False
End If

End Sub

#End Region

End Class

I would like to use this journal as a base for a customer requirement that I have.

The requirement is that all purchase parts be on a specific range of layers and all manufactured parts be on another set of layers. The parts can be identified by the first character of the part number.

Any recommendations on how to approach this? I was thinking about adding a conditional statement to determine the part file name and then move to the appropriate layer, and then index the layer number by one.

Hello! First off thank you for all the information about journaling with NX! I'm currently working on a program that analyses assemblies and parts to predict the cost of a product. The program is able to process parts already. Now I need to cycle trough all parts of my assembly. I use a Public Class that contains Public functions and subs. But I get errors if I change the program from a module to a Class. The Error Message: System.Reflection.TargetException: The non-static method requires target. Or is there a way to integrate a Module in a Class and call Functions from the Class?

Greetings
Tim Schröder

Imports Microsoft.VisualBasic
Imports System
Imports NXOpen
Imports NXOpen.UF
Imports NXOpen.Assemblies

Public Class NXJournal

Public theSession As Session = Session.GetSession()
Public ufs As UFSession = UFSession.GetUFSession()
Public lw As ListingWindow = theSession.ListingWindow
' class members
'Public theSession As Session
'Public theUFSession As UFSession
Public theUI As UI
'Public lw As ListingWindow
'Public workPart As Part

'Zählervariable
'Dim z As Integer

Dim workPart As Part = theSession.Parts.Work
Dim dispPart As Part = theSession.Parts.Display
Dim z As Integer = 0

Public Sub Main(ByVal args() As String)

lw.Open

Try
Dim c As ComponentAssembly = dispPart.ComponentAssembly
'to process the work part rather than the display part,
' comment the previous line and uncomment the following line
'Dim c As ComponentAssembly = workPart.ComponentAssembly
If Not IsNothing(c.RootComponent) Then
'*** insert code to process 'root component' (assembly file)
lw.WriteLine("Assembly: " & c.RootComponent.DisplayName)
lw.WriteLine(" + Active Arrangement: " & c.ActiveArrangement.Name)
'*** end of code to process root component
reportComponentChildren(c.RootComponent, 0)

Else
'*** insert code to process piece part
lw.WriteLine("Part has no components")

End If
Catch e As Exception
theSession.ListingWindow.WriteLine("Failed: " & e.ToString)
End Try
lw.writeLine("Test" & z)
lw.Close

End Sub

'**********************************************************
Public Sub reportComponentChildren(ByVal comp As Component,
ByVal indent As Integer)

For Each child As Component In comp.GetChildren()
'*** insert code to process component or subassembly
lw.WriteLine(New String(" ", indent * 2) & child.DisplayName())
If child.DisplayName Like "03-*" Then
'test2.testsub(z)
End If
'*** end of code to process component or subassembly
If child.GetChildren.Length <> 0 Then
'*** this is a subassembly, add code specific to subassemblies
lw.WriteLine(New String(" ", indent * 2) &
"* subassembly with " &
child.GetChildren.Length & " components")
lw.WriteLine(New String(" ", indent * 2) &
" + Active Arrangement: " &
child.OwningPart.ComponentAssembly.ActiveArrangement.Name)
'*** end of code to process subassembly
Else
'this component has no children (it is a leaf node)
'add any code specific to bottom level components
End If
reportComponentChildren(child, indent + 1)
Next
End Sub
'**********************************************************
'Sub GetUnloadOption(ByVal dummy As String) 'As Integer
'Return Session.LibraryUnloadOption.Immediately
'End Sub
'**********************************************************

End Class

Hi,
I just want to integrate the code in my program that uses a Public Class. I figured out, that it isn't possible to call a Function from a Module that is contained in a Public Class. Is there a way to change this code, to run in a Class instead of a Module? This would save me a lot of work! I'm currently working on my thesis and I’ve never been working with Visual Basic before. I don’t really know exactly the difference between a Module and a Class. The program I’m working on is based on a Class that contains Functions and Subs. Or is there a way to integrate this Module in my program?